UPVC Door Lock Replacement
UPVC doors are a great security measure against burglaries. They do have their limitations, but they can be overcome with the installation of a deadlock.
It's time to replace the barrel lock if your uPVC door lock is loose. This easy DIY project will enhance the security of your home as well as improve its appearance.
The old lock cylinder must be removed.
If you're experiencing that your front door is fragile when you lock it, or your key struggles to turn, you could have a damaged lock cylinder. Replacing it will ensure smooth operation and increase security. The procedure is fairly simple and should only take 30 minutes. You'll require a screwdriver. Open your door and examine the edge of the door close to the lock cylinder. There should be a screw that is roughly in line with the bottom part of the cylinder. Take it off using the screwdriver and keep it in a safe place.
You'll need to know the size of the cylinder you have in place so you can locate a suitable replacement. The sizes generally vary from 60mm up to 110mm. To determine the size you'll need to find the screw on the lock faceplate and then take it off. You can also turn the lock handle with the key while the cylinder is still in place to see how the cylinder moves in each position.
Next, you'll need to determine the cylinder's diameter and cylinder cam length. These measurements are essential for ensuring that your new lock will fit on the door you have. The dimensions may differ based on the kind of uPVC. You'll have to choose one that is identical or slightly bigger than the existing cylinder.
Once you have the measurements, it's time to remove the old cylinder from the door. It's not difficult, but you must perform it properly to avoid damaging your door frame or door. Make sure the door is properly propped up or secured to ensure that it doesn't close between steps.
A professional locksmith can be a good choice if you aren't sure how to do it yourself. They can provide expert guidance, flawless execution and peace-of-mind. They can also assist you to choose a safe and secure locking system. However, DIY has its perks, including saving cash and learning new techniques. You just need patience and the right tools like a Phillips Screwdriver. Change your uPVC lock isn't as intimidating as it seems.
Installing the new lock cylinder
If you are changing the locks on your front door, it is essential to use the correct measurements and follow the proper steps to make sure that the new lock goes in correctly. This will not only help you avoid problems in the future but also keep your home secure and permit you to use a key on both sides of the door. Before replacing your uPVC lock, you must take measurements of the overall length and the backset as well as the cylinder's diameter. These measurements will ensure that the lock cylinder can fit into the uPVC and work properly without any gaps.
The first step of the process is to take off the door handle by loosening the screws holding it with the screwdriver. The next step is to locate the barrel screw that holds the lock in place and remove it. You can then take out the lock you have previously used by inserting the key into the cylinder and turning it left and right. You can remove the cylinder if the key is in one of these positions.
Installing the new cylinder inside the front door is simple and requires the same steps as you took to remove the old one. You should be aware that the new cylinder will not fit into the space left by the old one. The cylinder has to be aligned correctly so that it can be locked and closed using a key. To achieve this, ensure that the cylinder is fitted with an elongated keyway and is aligned in its slot.
It is not difficult to install the latest uPVC door lock, but you must be cautious not to harm the door's frames or handles. If you are uncertain about your abilities to complete this project, hire an expert who is certified by Checkatrade and has experience with these kinds of doors. A locksmith can help you save time and money by completing the work quickly.
Attaching the door handle
You might want to alter your lock on your front entrance due to a variety of reasons. You could have lost your key, your previous tenant hasn't returned your keys or you'd like to upgrade to more secure locks. It takes just five minutes to replace the barrel on a lock of the uPVC front door. You will need a Phillips-head screwdriver, a new cylinder of the lock, and an extra key (if you intend to use one). Make sure that the door is opened or secured safely to ensure that it doesn't shut during the process.
There are some issues when changing a uPVC front door lock mechanism, but they are not as difficult to repair as you might think. Start by identifying what type of lock is on your front door, and determine the size you'll need to replace. For older doors, there are strip locks and multipoint locks. It's easier to replace your uPVC door lock if you know what brand and model it's.
After replacing the cylinder you will need to connect the handle. To begin, you'll need to loosen a set screw on the spindle shaft of the handle with the aid of a screwdriver. Then, you can take off the handle to expose the spindle shaft. If the shaft is threaded you'll need to loosen a bit and then back it up using a screwdriver to ensure that it is properly fitted.
After you've tightened the screws on the new handle and the lock cylinder, it's now time to test the lock. Make sure that the key turns easily and is well-fitted, and the locking mechanism of the handle is working well. If you're not comfortable doing this yourself A locksmith can complete the job for you.
Be aware that uPVC lock mechanisms and door handles require regular lubrication to function properly. This is particularly relevant in areas with high wear and tear, like those that are frequently used or locked and shut. A little bit of lubricant can go in a great way to ensure that they function properly and prolong their life.
Testing the new lock
A door lock made of upvc is a critical component of your home's security. However, like any other device it is susceptible to wear and tear over time or become damaged. Regular maintenance is crucial to a properly functioning uPVC locking system. This will prevent problems from happening and could compromise the security of your home. This can be done by lubricating internal mechanisms once every six months with a dependable oil. This will prevent the lock from rusting and damage.
You can apply a silicon spray in addition to the regular lubricant to loosen up the keyway. This makes it easier to insert keys. This is a simple DIY fix that will save you money over the course of time. You should avoid using WD-40 because it could leave a oily residue that can damage the lock.
Once you have installed the new cylinder, it's crucial to test it before assuming that it works properly. You can test this by testing the handle both from both sides of the door. If everything is working, you can then put the handles back into position and then re-insert the spindle screw. Replace all the screws that held the handles in place. Give yourself a pat on your back for a good job!
A locksmith can add additional features to enhance the security of your home, for example door chains or sash jammers. They can assist you in selecting the most appropriate locks for your house. A professional can also assist you in determining the right size cylinder for your doors, which is crucial because a wrong lock can compromise your security.
The cost of replacing the cost of replacing a uPVC lock can vary depending on the type of lock used and the number of doors that need to be replaced. upvc door locks replacement of a professional locksmith will range from PS75-PS100 per hour, however this cost will vary based on the location you live in and the type of lock you need. Compare locksmith prices before choosing a firm.